Specials

Specials are made using the same high quality materials and state of the art manufacturing methods as all our filament.*

Toner Plastics filament goes through a rigorous, multi-step quality control process. Our fully trained operators check the filament during all parts of the production process, from extrusion to final packaging. We routinely evaluate the manufacturing process to ensure that the final product is of the highest quality.

Our PLA has a diameter tolerance of +/- 0.05 mm, and our ABS has a diameter tolerance of +/- 0.08 mm to ensure a consistent flow rate. The filament is tightly wound and secured to prevent tangling. Each spool is vacuum sealed with a desiccant to protect it from the elements, as well as wrapped in bubble wrap to provide protection during transit.**

We are proud to produce all of our filament in the USA at our plant in East Longmeadow, MA.

Recommended PLA Printer Settings:

• Extruder Temperature: 205-215℃
• Printing Speed: 50-90+ mm/s
• Bed Temperature: 50-60℃ (Not necessarily required)
• Bed Adhesion: Blue Painters Tape

Recommended ABS Printer Settings:

• Extruder Temperature: 220-240℃
• Printing Speed: 50-90 mm/s
• Bed Temperature: 100-130℃
• Bed Adhesion: Hair Spray or ABS Glue

All Toner Plastics PLA & ABS (including our specials) filament is Reach and RoHS compliant.

⚠ California Residents RE: ABS Filament: 

Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov

Warning: Cancer and Reproductive Harm www.P65Warnings.ca.gov

*All items are subject to availability. In the event that the item you ordered is no longer available, we will inform you as soon as possible!

**Despite our precautions, spools can occasionally still experience damage during transit. If you are in need of assistance for damaged spools, please reach out via our contact form and our stellar customer service team would be happy to assist you!

For further information about PLA, visit https://en.wikipedia.org/wiki/Polylactic_acid

For further information about ABS, visit https://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene

Ingeo and the Ingeo logo are trademarks or registered trademarks of NatureWorks in the USA and other countries.